 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 491-1 SMT Data Line EMI Filters - PDLF * Available in 4, 3 and 2-line versions * See our CCDLF series for 10 and 8-line EMI filters * Exceptional common mode noise attenuation from 15 MHz to 300 MHz; passes signal line data below 300 MHz with minimal attenuation * DC current capacity of 500 or 100 mA. * Excellent electrical isolation (300 Vrms) Designer's Kit D303 contains four each of all values plus DLF and CCDLF filters Core material Ferrite Terminations RoHS compliant Tin-silver-copper over tin over nickel over phos bronze terminations. Other terminations available at additional cost. Weight 183 - 201 mg Ambient temperature -40C to +85C Storage temperature Component: -40C to +85C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Part number1 PDLF4000L_ PDLF4500L_ PDLF3000L_ PDLF3500L_ PDLF2000L_ PDLF2500L_ Lines 4 4 3 3 2 2 Current max2 (mA) 100 500 100 500 100 500 Inductance min3 (H) 5 5 5 5 5 5 Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) DCR max (mOhms) 250 200 250 200 250 200 Mean Time Between Failures (MTBF) 26,315,789 hours Packaging 500/7reel; 2000/13 reel Plastic tape: 16 mm wide, 0.35 mm thick, 8 mm pocket spacing, 4.4 mm pocket depth PCB washing Only pure water or alcohol recommended Typical Response* -10 1. When ordering, please specify packaging code: PDLF4500LC C = 7 machine ready reel. EIA-481 embossed plastic tape (500 parts per full reel). D = 13 machine ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Current rating is for each line. 3. Inductance is per winding, tested at 1 MHz. 4. Operating temperature range -40C to +85C. 5. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Attenuation (dB) 0 Differential Mode 10 20 Common Mode 30 0.1 1 10 100 1000 Frequency (MHz) * Measured on HP 8753D network analyzer. Ref: 50 Ohms. Specifications subject to change without notice. Please check our website for latest information. Document 491-1 Revised 10/30/08 (c) Coilcraft, Inc. 2009 Document 491-2 Surface Mount Data Line EMI Filters Notch indicates pin 1 1 8 Recommended Land Pattern 0.050 cen 1,27 0.030 0,76 1 8 PDLF4000, 4500 8765 PDLF3000, 3500 8765 PDLF2000, 2500 8765 0.217 0.006 5,50 0,15 4 PDLF XXXXL 5 5 4 0.200 5,08 0.307 0.008 7,80 0,20 0.138 0.008 3,50 0,20 0.007 / 0,18 1234 1234 1234 0.060 1,52 0.317 0.012 8,05 0,30 0.236 6,00 4 * 5 0.0395 1,00 * 0.012 0,305 0.020 0,50 0.050cen 1,27 1 8 * Dimensions are typical prior to applying solder Dimensions are in inches mm 0.098 2,50 Specifications subject to change without notice. Please check our website for latest information. Document 491-2 Revised 10/30/08 (c) Coilcraft, Inc. 2009 |
Price & Availability of PDLF2500L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |